MOZA AB9 Base Frontal Mounting
Overview
Attach the included 8080 profile onto the related mount, prior to the steps as shown in the manual below (10_2025).
For most kits, this profile is 60mm long.
Assembly and Instruction Manuals
Current version:
Troubleshooting
If you have or plan to get the twist extension, the standard 8080x60mm may not provide enough clearance on a table mount(-like) setup.
The https://docs.monster.tech/s/manuals/doc/table-mount-long-floor-support-jqCw41fy2l is a potential remedy here, acting as spacer and extra support.
Alternatively, a longer 8080 profile can be used.