# Tools & Assembly

## Assembly Tools

Assembly tools are not included by default for most orders. 

To avoid unnecessary waste, we offer a quality metric hex key set as a separate item:   
[https://www.monster.tech/en/product/hex-key-with-ball-head-set/](https://www.monster.tech/en/product/hex-key-with-ball-head-set/ "https://www.monster.tech/en/product/hex-key-with-ball-head-set/")   
[https://www.mtsim.com/product/hex-key-set-ball-head/](https://www.mtsim.com/product/hex-key-set-ball-head/ "https://www.mtsim.com/product/hex-key-set-ball-head/") 

Hex wrenches and/or an adjustable wrench can also come in handy for various sets.  
Note that these will have to be sourced locally as applicable.


For a locally sourced/pre-owned hex key (set), there are two items of note:

* Uninsulated keys are preferred.  
  Insulated 6mm hex keys can be too thick for the profile slots.
* A Ball head is highly recommended for the 6mm key.  
  Many universal connectors are located in longer profiles, or otherwise obstructed from direct access.

## **Power Tools**

Hand Tools, such as Allen wrenches and/or ratcheting tools, are advisable for assembly and overall maintenance.   
Power tools like an impact & bit drill are more likely to apply excessive force, strip bolt heads and threads, and/or damage parts and devices.

The MFC and MPS require extra care in this regard:  
The internal threaded inserts are very difficult to replace if stripped or otherwise damaged.   
  
Should a power tool still be desired for assembly, it’s recommended to use a low voltage impact drill at the lowest setting until snug, followed by a manual inspection using a hand tool. Regardless, any use of power tools is at your own discretion. 


Specific assembly instructions and troubleshooting can be found under @[https://docs.monster.tech/s/manuals/doc/instruction-manuals-ffOKfWkUkE](https://docs.monster.tech/s/manuals/doc/instruction-manuals-ffOKfWkUkE).

These entries are sorted based on their primary category.  
Note that you are not limited to these categories for your setup, and various kits are multi-purpose.

E.g.: @[https://docs.monster.tech/s/manuals/doc/mouse-extension-for-chair-mount-x5GqrPjT0U](https://docs.monster.tech/s/manuals/doc/mouse-extension-for-chair-mount-x5GqrPjT0U) is normally used on both Chair and MTS HOTAS side mounts.

Further DIY setups and combinations are likewise possible.

---

**Documents**

- [FAQ](https://docs.monster.tech/s/manuals/doc/faq-djldmh1UPE)
- [Instruction Manuals](https://docs.monster.tech/s/manuals/doc/instruction-manuals-ffOKfWkUkE)
- [Chair Mount Compatibility](https://docs.monster.tech/s/manuals/doc/chair-mount-compatibility-ufimFpkezv)
- [Software](https://docs.monster.tech/s/manuals/doc/software-4drRBZzipW)
- [Contact](https://docs.monster.tech/s/manuals/doc/contact-dSKwxWOiaX)
- [Imprint](https://docs.monster.tech/s/manuals/doc/imprint-6fxDraKotd)